How Do You Make a Roulette Table?

Making a roulette table is a fairly simple process. You’ll need a sturdy table, some wood screws, and some wood glue.

You’ll also need a roulette wheel, some ball bearings, and some sandpaper. .

1) Begin by measuring the table’s dimensions. This will help you determine the size of the roulette wheel you’ll need.

Roulette wheels range in size from 18 to 36 inches in diameter, so make sure to select the right one for your table.

2) Drill holes in the base of your table using the screws and wood glue. These holes should be large enough to accommodate the roulette wheel and the ball bearings without interference.

3) Screw the roulette wheel onto the base of your table using the screws and wood glue. Make sure that the roulette wheel is centered on the hole you drilled earlier.

4) Fit the ball bearings into the holes on either side of the roulette wheel. Be sure that they’re fully seated before screwing them in place using the screws and wood glue.

5) Sand down any rough edges on your table using sandpaper. This will give your table a smoother appearance and make it easier to handle during gameplay.

Related Posts