What Are the Slots on the Table Saw Called?

There are a variety of names for the slots on a table saw that allow you to make precise, accurate cuts. The most common names are kerf, throat, and groove.

Each of these terms has a specific meaning that will be explained below.

Kerf is the space between the blade and the wood that is being cut. The kerf is narrower near the blade and widens as it moves away from the blade.

The width of the kerf is important because it determines how much wood will be cut at one time.

Throat is the space that runs along the top of the saw table. The throat is usually slightly wider than the kerf, and it’s important to keep it that way because it’s where the saw blade slides into the wood.

If the throat is too wide, it will cause inaccuracies when cutting because the blade won’t be able to stay in one place long enough to make a clean cut.

Groove is another name for a slot on a table saw. It’s usually slightly wider than the throat and runs along one side of the table.

When you make a cut in groove, you’re actually cutting two pieces of wood at once – one right next to the other – which makes it very accurate and precise.

Related Posts